Bug List

1. Fixed bug: paste of X10 signal did not clear clipboard buffer
2. Fixed bug: X10 signal setup dialog missing tooltips
3. Fixed bug: state button activator edit allowed selection of another button within the same stategroup
4. Fixed bug: group boxes clipped at bottom and other rendering issues under Windows Vista
5. Fixed bug: buttonkit and other dialogs overlapped main dialog due to padding under Windows Vista
6. Fixed bug: resize cursor jumps by 1 pixel when clicked for group box resizing

12/28/07 -- IRCommand2 Version 3.87

1. Fixed bug: power-on wait time limit of 15 seconds was too short for some devices -- limit increased to 99 seconds
2. Fixed bug: potentially unsafe i/o thread termination sequence (no reported issues)

7/21/07 -- IRCommand2 Version 3.86

1. Fixed bug: buttons trained via the USB-UIRT dongle did not work (would not control the device) for some Sony remotes (special thanks to Charles M. for reporting this bug)

3/18/07 -- IRCommand2 Version 3.85

1. Fixed bug: some pop-up windows have incorrect right margin when program window size is set to other than 'default' in Program Options
2. Fixed bug: listen triggers did not work consistently when an Echostar remote (or
   other similar signal format) was used with a USB-UIRT dongle
3. Fixed bug: trained Echostar remote commands using the USB-UIRT dongle did not work (special thanks to Pauline B. for reporting this bug and assisting with resolution)
4. Fixed bug: signal copy/paste loses description for a new unsaved signal
5. Fixed bug: X10 response wait too short for dim/bright above 87% (special thanks to Jason E. for reporting this bug)

10/8/06 -- IRCommand2 Version 3.82

1. Fixed bug: could not set a UEI code for a state group shift command
2. Fixed bug: minor resource leaks with icons cleaned up
3. Fixed bug: copy/paste not copying the "Hide Text" flag property
4. Fixed bug: copy/paste for button groups did not copy the button group label
5. Fixed bug: Device Insert Copy did not copy all properties of buttons and groups
6. Fixed bug: Device Insert Copy did not translate Activator, Cluster and Macro references to the new device panel objects
7. Fixed bug: Best Fit text sizing not allowing for letters with descenders
8. Fixed bug: Drag All could sometimes fail to limit range if a button extended outside the normal device panel area
9. Fixed bug: Startup status messagebox did not always refresh to show next message
10. Fixed bug: Set Code dialog did not properly initialize the Repeat# field
11. Fixed bug: Set Code dialog not recognizing [User Value] type key code on re-entry
12. Fixed bug: COM ports above COM9 could not be opened
13. Fixed bug: timer events would not execute until after property sheet was closed
14. Fixed bug: if MyBlaster wasn't first selected dongle then Set Codes was disabled in train dialog
15. Fixed bug: fast clicking on a button lost double-clicks
16. Fixed bug: exiting program with power-on delay pending caused memory leak
17. Added: macro support for state group shift and track commands
18. Added: more uniform text appearance across full font size range (using bold font)

2/6/06 -- IRCommand2 Version 3.74

1. Fixed bug: Scope edit buttons not disabled when signal not viewable
2. Fixed bug: X10 driver could hang in rare instances
3. Fixed bug: COM function 'PosSize' was not returning a Variant which was not script friendly

7/30/05 -- IRCommand2 Version 3.72

1. Fixed bug: button group listen triggers fail to register on program restart.
2. Fixed bug: signal description edits lost if train done prior to save.
3. Fixed bug: copy/paste not transferring the signal description.
4. Fixed bug: dongle init showed init messages for empty dongle slots.
5. Fixed bug: click delays of 0 seconds were allowed.

11/22/04 -- IRCommand2 Version 3.62

1. Fixed bug in CM11A X10 driver that could cause it to hang when attempting to send a command at the same time that the CM11A was receiving something.

2. Lowered the default low-band sub-carrier frequency from 40.1kHz to 38.8kHz. This better centers the low band transmit sub-carrier so that devices at the low end of the band (37kHz) can be better controlled with the low band setting. If you can no longer control a device as a result of installing v3.62 then select the new "Custom" band setting and use a value of 40kHz - this should restore control of the device.

3. Event viewer now shows AM/PM format for click delay time entries.

4. Windows resource consumption is now greatly reduced for large configurations with many device panels and buttons. This fix is of greatest benefit to WinME/98/95 users.

5. Fixed bug in device panel label edit that could sometimes cause loss of edits.

6. Train and paste functions now append the new signal to any existing signal rather than replace the existing signal. Click the "Clear" button before training if you want to replace the existing signal rather than append to it.

7. IRC2 no longer exits if it is minimized to the system tray and the last COM client closes its connection.

8. Fixed bug that could cause validation messages for invalid entries in dialog forms to sometimes pop up multiple times for the same error.

9. Animation for minimizing to system tray is now correct.

10. The dongle port setup dialog now also accepts numeric entries for the port name and will automatically convert them to the required "COMx" format.

11. A status message reminding the user to right-click a button to set its properties will now appear whenever a new button is created.